Underground Cable Distribution Laying Tools--China Factory

Underground Cable Distribution Laying Tools

Transmission and distribution lines

1. Cable drum reel stand

The Cable drum reel stand is a machine used to support cable drums, with cable pulleys/cable rollers, hydraulic stringing traction heads, etc.

Technical Parameters

Simple reel payout stand

Order number	Model	Rated load (kN)	Range of adjustable height (mm)	Weight (kg)	Order number	Model	Rated load (kN)	Range of adjustable height (mm)	Weight (kg)
15181	SIC-1	10	450-650	20	15201	SIK-3	30	400-1000	30
15182	SIC-3	30	600-900	25	15202	SIK-5	50	710-1270	44
15191	SIL-1	10	450-650	22	15211	SIL-3A	30	400-1000	28
15192	SIL-3	30	600-900	24	15212	SIL-5A	50	900-1300	35
15193	SIL-5	50	900-1300	27

·Features: to adjust reel by screw mandrel .light ,handy and practicable .it fit releasing wire manually .

Check more models please visit :

http://www.reach-power.com/Products/catalog_35/

2. Cable Roller(Cable Pulley)

A cable pulley is a machine used to support a cable and reduce traction (converting the sliding friction between the cable and the support into rolling friction) during the laying process.

Technical Parameters

Please check product details at:

http://www.reach-power.com/Products/catalog_52/

3 .cable tractor

The cable traction machine is a medium-sized complete machine for cable laying and traction. It consists of several parts, such as the traction head, the traction main unit and the take-up reel. It can be used for traction of power cables, communication cables, overhead lines, and other Where traction is required. It has the characteristics of compact structure, large traction and constant deceleration. It can be used alone or in combination with conveyors.

Technical Parameters

Model DQ Cable Pulling Winch

Order number		21131	21135
Model		DQ20	DQ40
Continuous linepull (kN)		20	40
Linespeed (m/min)		0～14	0～12
Steelrope diameter (mm)		Φ9.3	Φ11
Steelrope length (m)		600	650
Motor	Power (hp)	13	24
	Speed (rpm)	1800	2000
Dimension (m)		3.27×1.13×1.65	3.67×1.80×1.50
Weight (kg)		650	1100

·uses :to string earthground cable .

·feature :

1.hydraulic transmission ,infinitely variation speed .overpull protection

2.automatic rope winding .

3.mount pull length measure equipment .

http://www.reach-power.com/Products/products_198.html

Cable winch

Engine Powered Winch
Model	Engine Configuration	Rotation	Gear	Pulling Speed(m/min)	Rated Pulling Force(Ton)	Weight(Kg)
HC-PW01	HONDA Petrol Engine(5.5HP)or Homemade Petrol Engine(4HP)	Positive Rotation	Slow	4.0	3.0	80
			Fast	9.0	1.8
		Reverse	Reverse	3.0	No Lifting!
HC-PW02	Diesel Engine(4HP)	Positive Rotation	Slow	4.0	3.0	95
			Fast	9.0	1.8
		Reverse	Reverse	3.0	No Lifting!
HC-PW03	YAMAHA Petrol Engine(11HP) or HONDA Petrol Engine(13HP)	Positive Rotation	Slow	4.5	5.0	140
			Fast	9.0	2.5
		Reverse	Reverse	3.2	No Lifting!
HC-PW04	Diesel Engine(6HP)	Positive Rotation	Slow	4.5	5.0	160
			Fast	9.0	2.5
		Reverse	Reverse	3.2	No Lifting!

http://www.reach-power.com/Products/catalog_29/

4 cable conveyor /cable sender

A cable conveyor is a medium-sized electric machine used to lay power cables (or large-diameter channel cables).

Technical Parameters

Cable feeder

·Uses:to string large diameter electric power cable and communication cable .

·notes:please writing in contract clearly if need purchasing winch .

5 cable heating straightening machine

The cable heating straightening machine is a device that uses a heating method to straighten and cool the cable.

6 cable straightening machine

A cable straightener is a construction tool that requires the cable to be straightened or bent during construction.

7 hydraulic crimping machine

Hydraulic crimping pliers are a special tool for cable cold-pressing connections. They are suitable for the installation of cable terminations and intermediate joints. They are not subject to explosion-proof requirements. They are especially suitable for the installation of heat shrinkable shrinkage fittings and prefabricated parts.

Technical Parameters

EP-510C Manual hydraulic crimping tool

1、two phases, high speed, low pressure, fast, easy operating. the rotating squeeze withdrawing style make sure the oil return quickly.

2、there is a 'kacha' warning bell rings when the pressure over 700kg/cm²（12TON）, and the tool will stop.

3、the rod is made of insulating fiberglass, and withstand with 210Kv voltage last for several minutes.
4、the head of the tool can be 180 rotated,pressure regulating valve is on the side.

order number	model	output(T)	stroke(mm)	range(mm2)
161951	EP-410	12	312	35-300
161952	EP-431	13	32	16-300
161953	EP-510C	13	38	50-400

Superhigh pressure hydraulic pump station

Order number	Model	Rated oil pressure (MPa)	Flow (L/min)	Engine	Power (kW )	Weight (kg)
16143	YBG-94WC-A3	75	1.5	Diesel Z170F	2.94	101
16144	YBG-94WD	75	1.5	Motor Y90L-4	1.5	68
16146	YBG-94WQ	75	1.5	Honda gasoline GX160	4.1	68
16147	YBG-94WC	75	1.5	Diesel Z170F	2.94	110

Model QY hydraulic compressor

Order number	Model	Maximum Compression(kN)	Maximum oil pressure (MPa)	Applicable conductor	Stroke (mm)	Weight (kg)
16101	QY-25	250	60	≤LGJ240	22	6
16102	QY-35	350	70	≤LGJ240	25	12
16103	QY-65	650	94	≤LGJ500	25	25
16104	QY-125	1250	94	≤LGJ720	25	40
16105	QY-200	2000	94	≤LGJ1440	25	85

．Uses: to compress conductor ,earthwire and Cupreous- aluminous terminal .

．Notes:

1.16101.16102 operated by the manual or single tube electric pump ;

2.16103-16105 operated by superhigh pressure hydraulic pump station

3. Matched compression die need to purchasing additionally .

8 mechanical pressure clamp

Mechanical crimping tools are a special tool for cold-pressing connection of wire and cable, suitable for terminal and intermediate joint installation. The pressure clamp is not limited by the installation requirements of explosion-proof and fireproof; it is reliable in operation, high in pressure, convenient in operation and excellent in performance.

Technical Parameters

9 insulation stripping tool

Cable insulation stripping is a new type of construction tool for stripping and stripping cable insulation. This tool is light, convenient and highly efficient. The depth of the feed can be adjusted arbitrarily without damaging the cable core.

(overhead cable ) insulated conductor stripper .

Order number	21480	21481
Model	NP30	NP40A
Peeling depth(mm)	≤4
Maximum cable diameter (mm)	Φ30
Weight (kg)	0.5	0.9

·Uses :to peel the insulating layer of an aerial cable

·notes : 1.for 21480 please writing the specification while purchasing .

2.for 21480 also can used as electrification operation .

10 electric cable grinding machine

The electric cable sanding machine is suitable for polishing the insulation of power cables. It is a convenient, fast and labor-saving construction tool. This tool is best suited for the primary insulation of high voltage cables.